Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Enjoy fresh, clean, and fluoride-reduced water right from your kitchen faucet with the ENEVIVE® 7-Stage Countertop Fluoride Water Filter System. Its advanced multi-stage filtration combines proven technologies to remove contaminants, improve taste, and balance pH — all in a compact countertop design.
1 & 7. Pre- and Post- Filtration Pads (1 micron) Remove suspended particles like silt, sediment, cysts (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter for crystal-clear water.
Fluoride Removal Media Contains Fluoride Charcoal Granulated Activated Carbon (GAC) or optional Aluminum Oxide media designed specifically to reduce fluoride, lead, and arsenic through adsorption and chemical reaction — effective across a wide pH range.
Capacity: Avg. 1000–1500 gallons (up to 11,000 ppm fluoride with effluent below 0.2 ppm)
3 & 5. Eagle Redox Alloy® (ERA-6500 & ERA-9500) A special copper-zinc alloy blend that rapidly oxidizes chlorine and chloramines, improving water taste and safety.
Ion Exchange Resin Reduces heavy metals such as lead, copper, aluminum, and water hardness minerals.
Granulated Activated Carbon (GAC) Adsorbs organic contaminants including chlorine, cancer-linked chemicals (THMs, benzene), pesticides, herbicides, VOCs, PCBs, MTBE, and more — eliminating bad tastes and odors.
Additional ceramic and tourmaline balls enhance water alkalinity and overall quality.
Easy Installation: Simply place on your countertop and connect to any kitchen faucet
Convenient Diverter Valve: Switch easily between filtered and unfiltered water
Optional Washable Pre-Filter: For sediment-heavy water, prolongs filter life and efficiency
Compact Design: Available in white polypropylene or sleek stainless steel finishes
Certified Performance: Delivers effective fluoride removal from municipal inorganic fluoride sources
Designed for typical residential use; media replacement depends on water quality and volume
For organic or natural source fluoride (e.g., well water), consult an ENEVIVE® Associate for system recommendations
Dimensions: - Polypropylene: 5" L x 13" H x 5" W - Stainless Steel: 5.5" L x 13.5" H x 5" W
Operating Pressure: 20–60 psi
Operating Temperature: 40°F–90°F
Maximum Flow Rate: 0.3–0.5 gallons per minute
Enjoy fresh, clean, and fluoride-reduced water right from your kitchen faucet with the ENEVIVE® 7-Stage Countertop Fluoride Water Filter System. Its advanced multi-stage filtration combines proven technologies to remove contaminants, improve taste, and balance pH — all in a compact countertop design.
1 & 7. Pre- and Post- Filtration Pads (1 micron) Remove suspended particles like silt, sediment, cysts (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter for crystal-clear water.
Fluoride Removal Media Contains Fluoride Charcoal Granulated Activated Carbon (GAC) or optional Aluminum Oxide media designed specifically to reduce fluoride, lead, and arsenic through adsorption and chemical reaction — effective across a wide pH range.
Capacity: Avg. 1000–1500 gallons (up to 11,000 ppm fluoride with effluent below 0.2 ppm)
3 & 5. Eagle Redox Alloy® (ERA-6500 & ERA-9500) A special copper-zinc alloy blend that rapidly oxidizes chlorine and chloramines, improving water taste and safety.
Ion Exchange Resin Reduces heavy metals such as lead, copper, aluminum, and water hardness minerals.
Granulated Activated Carbon (GAC) Adsorbs organic contaminants including chlorine, cancer-linked chemicals (THMs, benzene), pesticides, herbicides, VOCs, PCBs, MTBE, and more — eliminating bad tastes and odors.
Additional ceramic and tourmaline balls enhance water alkalinity and overall quality.
Easy Installation: Simply place on your countertop and connect to any kitchen faucet
Convenient Diverter Valve: Switch easily between filtered and unfiltered water
Optional Washable Pre-Filter: For sediment-heavy water, prolongs filter life and efficiency
Compact Design: Available in white polypropylene or sleek stainless steel finishes
Certified Performance: Delivers effective fluoride removal from municipal inorganic fluoride sources
Designed for typical residential use; media replacement depends on water quality and volume
For organic or natural source fluoride (e.g., well water), consult an ENEVIVE® Associate for system recommendations
Dimensions: - Polypropylene: 5" L x 13" H x 5" W - Stainless Steel: 5.5" L x 13.5" H x 5" W
Operating Pressure: 20–60 psi
Operating Temperature: 40°F–90°F
Maximum Flow Rate: 0.3–0.5 gallons per minute
